Project Plan : Tribrid Building

-

 In this blog, I will include my project plan board with what I will do each week to complete my project by the deadline in week 9.


This is the link to my project plan:

https://www.canva.com/design/DAFQtVsQ4xA/8rJbqIT1PHuWu3mXuq7_HA/view?utm_content=DAFQtVsQ4xA&utm_campaign=designshare&utm_medium=link&utm_source=publishsharelink

Comments

  1. Zoe Van-de-Velde3 November 2022 at 04:11

    Again you should not use thsi long ugly link please use text to display

    ReplyDelete
  2. Zoe Van-de-Velde3 November 2022 at 04:12

    Also you could have been more detailed - just research some architects is not a plan!

    ReplyDelete

Post a Comment

Popular posts from this blog

Creating my boards process / results - Project Development

-
Image
 This is my process of creating my boards for my final art portfolio project, using Photoshop.  First I created a new document by clicking on 'New File', then 'print', 'A3', and chose the landscape mode. after my page was open I went on 'Unsplash' to find a related background.  Then I clicked on 'File' that's at the top left corner, 'open' and 'on your computer' and chose the image that I downloaded.  After that, I selected the image with the 'rectangular marquee' tool which is the first icon on the left toolbar and then clicked on 'edit', 'copy' and then went to my first page, clicked on 'edit' again and pasted it. Then from the right tool bar I lowered the opacity to 40% which is located at the 'layers' category.  Then I followed the same steps with uploading my concept image and arranged the size and placement by clicking on the 'move' tool and then clicking on 'show trans...
Read more

3D Design Piece Process / Results - Project Development

-
Image
This is my process of creating the first 3D piece. First, I created the outlines of my design digitally using AutoCAD and created a DFX  document. Then I visited the laser cutting workshop, where I laser cut the pieces. I chose pulpboard for the material, 1mm for the curving parts because it bends easily, and then 3mm for the rest of the pieces.  After all the pieces were cut I brought everything back to the studio.  I noticed some pieces were ruined during the cutting because of a cutting malfunction so for that reason I took the rest of the material that remained and tried to replace the ruined pieces by cutting it as carefully and precisely as possible with a craft knife. I also sandpapered the edges to be more smooth.  After all the extra pieces were cut, I tested out different techniques in which I would try to recreate the exterior. In this picture, I tried to colour the triangles with markers which left a messy result but helped me decide on the colours shades...
Read more

Floorplans Process / Results - Project Development

-
Image
This is my process of creating the floorplans with Homes by Me  Ground floor/reception For the first floor plan which is the ground floor, I opened a new document and created the base by selecting the floorplan icon on the left top corner and chose the "add wall" option. Then I started creating the rooms with the "add room separation" setting by going to the same floorplan icon. I created the reception area, sitting areas, lift, and bathrooms.  Then I added an additional room in front, which is the entrance pathway from the exterior entrance.  Next, I added floor colouring to have a clearer vision of the separated areas. I did that by clicking on the floors and then edit,  and then clicked on flooring from the "style" category. Lastly, I added doors for the bathrooms and sliding doors for the entrance and lifts. I did that by clicking  on the walls I wanted and then on "add", then selected the "exterior doors" for the entrance and ...
Read more